Casio PV-1000/Cartridge connector: Revision history

23 May 2023

• curprev 19:1019:10, 23 May 2023‎ Lidnariq talk contribs‎ m 1,634 bytes +1‎ not an ula

12 May 2023

• curprev 21:2621:26, 12 May 2023‎ Lidnariq talk contribs‎ 1,633 bytes +175‎ card edge dimensions?

11 May 2023

• curprev 17:1517:15, 11 May 2023‎ Fiskbit talk contribs‎ 1,458 bytes +7‎ Adds an underline to the pinout to show the location of the key.
• curprev 01:0001:00, 11 May 2023‎ Lidnariq talk contribs‎ 1,451 bytes −8‎ PCB thickness

15 April 2023

• curprev 19:4319:43, 15 April 2023‎ Lidnariq talk contribs‎ m 1,459 bytes 0‎ /IRQ could be bidi
• curprev 02:2602:26, 15 April 2023‎ Lidnariq talk contribs‎ 1,459 bytes +347‎ mention how expansion audio would work

6 April 2023

• curprev 04:2904:29, 6 April 2023‎ Lidnariq talk contribs‎ m 1,112 bytes 0‎ typo

4 April 2023

• curprev 00:2900:29, 4 April 2023‎ Lidnariq talk contribs‎ 1,112 bytes −21‎ No edit summary

3 April 2023

• curprev 04:1704:17, 3 April 2023‎ Lidnariq talk contribs‎ m 1,133 bytes +80‎ No edit summary
• curprev 04:1504:15, 3 April 2023‎ Lidnariq talk contribs‎ 1,053 bytes +1,053‎ Created page with "This diagram represents a top-down looking directly into the connector. The "B" side pins are on the label side of the cartridge. Pin pitch is assumed to be 0.1 inch, but this has not yet been verified. Cartridges are required to have a key cut between 10 and 11. (front) (back) PV-1000 | Cart | PV-1000 ------- +5V -- |B01 A01| -- GND /IRQ -> |B02 A02| -- chassis ground A14 -> |B03 A03| <- A15 A12 -..."